Item #FS1010	Description	Covers
	Crimp on spout with self-venting fingers, large 1.3 inch opening & bail type cap.  Self-venting fingers prevent the “glug-glug” effect but only with low viscosity liquids.  For easy pouring of higher viscosity liquids, we suggest adding a vent (PV20-52) on opposite side of cover. *Pending UN approval.	Available on: 40CT 40CR 40CRT 40CDL*

Item #FS1010V-TFE1	Description	Covers
	Crimp on spout with micro porous vent, self-venting fingers, large 1.3 inch opening & bail type cap.  Self-venting fingers prevent the “glug-glug” effect but only with low viscosity liquids.  For easy pouring of higher viscosity liquids, we suggest adding a vent (PV20-52) on opposite side of cover. *Pending UN approval.	Available on: 40CT 40CR 40CRT 40CDL*

Item #FS1010V-PV21P	Description	Covers
	Crimp on spout with buna vent, self-venting fingers, large 1.3 inch opening & bail type cap.  Self-venting fingers prevent the “glug-glug” effect but only with low viscosity liquids.  For easy pouring of higher viscosity liquids, we suggest adding a vent (PV20-52) on opposite side of cover. *Pending UN approval.	Available on: 40CT 40CR 40CRT 40CDL*

Item #FS108V 624	Description	Covers
	Crimp on spout with self venting fingers, large 1.25 inch opening and solid white dust cap.  Dust cap can be printed with customer’s logo for an up-charge (large volume users only).  Self venting fingers prevent the “glug-glug” effect but only with low viscosity liquids. For easy pouring of thicker, higher viscosity liquids an FS106 spout with a vent plug (PV20-52) on opposite side of cover is recommended.	Available on: 40CT 40CR 40CRT 40CDL

Item #FS108V-300	Description	Covers
	Crimp on spout with self venting fingers, large 1.25 inch opening and easy pull dust cap.  Self venting fingers prevent the “glug-glug” effect but only with low viscosity liquids. For easy pouring of thicker, higher viscosity liquids an FS106 spout with a vent plug (PV20-52) on opposite side of cover is recommended.	Available on: 40CT 40CR 40CRT 40CDL

Item #FS108V-300 TFE-1	Description	Covers
	Crimp on spout with micro porous vent, self venting fingers, large 1.25 inch opening and easy pull dust cap.  The micro porous vent is to prevent pressure buildup in the pail while keeping liquid in. Self venting fingers prevent the “glug-glug” effect but only with low viscosity liquids. For easy pouring of thicker, higher viscosity liquids an FS106 spout with a vent plug (PV20-52) on opposite side of cover is recommended.	Available on: 40CT 40CR 40CRT

Item #FS80	Description	Covers
	The FS80 is a heavy duty 70 MM screw cap.  This heavy duty 70MM cap has a different thread configuration than the lighter duty 70MM cap we offer on our standard covers.	Available on: 40CDL

Item #FS70	Description	Covers
	The FS70 is a heavy duty 70 MM screw cap with ¾ inch female thread in center.  The ¾ inch threaded opening has a knockout membrane at its base and is intended to accept a dispensing pump with a ¾ male thread.   Like the FS70 has a different thread configuration than the lighter duty 70MM cap we offer.	Available on: 40CDL

Item #70 MM Screw Cap	Description	Covers
	Light weight 70 MM screw cap.  This light weight 70MM cap has a different thread configuration than the heavy duty 70MM cap we offer.  It also has a coated paper liner option for better sealing.  The threaded opening on which this cap fits has three options: fully open, with a membrane, and with a tint plug opening. Check with your local plant for available options.	Available on: 40CT 40CRT 40CR

Item #TFS2P	Description	Covers
	This 2 inch Tint Plug fitting acts as a quick snap cap and is primarily used by paint companies for adding colors to the container of paint prior to shaking. It is available as a stand alone fitting or sometimes incorporated under the light weight 70MM screw cap  on the 5 gallon cover series.	Available on: 16CT 40CT 40CR 40CRT

Item #FS106 300	Description	Covers
	Crimp on Spout with large 1.25 inch opening and easy pull dust cap. This is one of the most common fittings used for dispensing liquids. It does not have a self venting feature built in so to insure easy pouring (no “glug-glug”) a vent plug PV10-52 is often added on the opposite side of the cover. This combination of FS106 style spout with a PV10-52 vent plug on opposite side of cover works especially well for pouring very viscous liquids.	Available on: 40CT 40CR 40CRT 40CDL

Item #FS106 300 PV21P	Description	Covers
	Crimp on Spout with large 1.2 inch opening, easy pull dust cap and buna vent. The buna vent is to prevent pressure buildup in the pail while keeping liquid in. This spout does not have a self venting feature built in, so to ensure easy pouring (no “glug-glug”) a vent plug PV10-52 is often added on the opposite side of the cover. This combination of FS106 style spout with a PV10-52 vent plug on opposite side of cover works especially well for pouring very viscous liquids.	Available on: 40CT 40CR 40CRT 40CDL

Item #FS106 624	Description	Covers
	Crimp on Spout with large 1.2 inch opening, solid dust cap. The dust cap can be printed with customer’s logo. This spout does not have a self venting feature built in, so to insure easy pouring (no “glug-glug”) a vent plug PV10-52 is often added on the opposite side of the cover. This combination of FS106 style spout with a PV10-52 vent plug works especially well for pouring very viscous liquids.	Available on: 40CT 40CR 40CRT 40CDL

Item #TFS 1P	Description	Covers
	TFS 1P is commonly known as a Rieke Jr.  This is a small diameter all plastic snap in spout with a 3/4 inch opening. Being all plastic this spout is used with ladings that corrode metal or where the product is run through a metal detector such as food.	Available on: 40CT 40CR 40CRT

Item #FS15	Description	Covers
	All plastic snap on spout with self venting feature and a large 1.2 inch opening. Being all plastic, this spout is used with ladings that corrode metal or where the product such as food that are run through a metal detector.	Available on: 40CT 40CR 40CRT

Item #FS14	Description	Covers
	All plastic snap on spout with large 1.2 inch opening. Being all plastic, this spout is used with ladings that corrode metal or where the product is run through a metal detector such as food. This spout does not have a self venting feature built in, so to ensure easy pouring (no “glug-glug”) a vent plug, PV10-52, is often added on the opposite side of the cover. This combination of FS14 style spout with a PV10-52 vent plug works especially well with very viscous liquids.	Available on: 40CT 40CR 40CRT

Item #PV20-52	Description	Covers
	All plastic vent plug.  This vent plug is used in conjunction with many of the pour spouts. It is installed on the opposite side of the cover fro the spout. The purpose of this vent is to allow air into the pail as the liquid is poured out, preventing the “glug-glug” effect.  This combination of a PV10-52 vent plug with a FS106 or FS14 spout works especially well with very viscous liquids.	Available on: 40CT 40CR 40CRT

Item #PV21P	Description	Covers
	The PV21P, also known as a “buna vent”.  The PV21P is a pressure relief or vacuum relief vent depending on how it is installed. When installed from the top of the cover it prevents excessive pressure from building in the pail. When installed from the underside of the cover the vent prevents excessive vacuum from developing in the pail. Also available incorporated into the following fittings; FS14, FS15, FS106 & FS108.	Available on: 40CT 40CR 40CRT